My New Project Teaser..

[StreetRX7]

Front
http://www.streetseen.vi/gallery/data/500/medium/IMAGE0011.JPG

Back
http://www.streetseen.vi/gallery/data/500/medium/IMAGE0021.JPG


Engine bay
http://www.streetseen.vi/gallery/data/500/medium/IMAGE0031.JPG

[StreetRX7]

Also my new turbo setup... :rofl: :rofl:

turbo just as big as engine... :rofl: :rofl:

http://www.streetseen.vi/gallery/data/500/medium/IMAGE0041.JPG

[3tc power]

why don't you go with the holset hx50? they are pretty cheap and you can find the rebuild kits really easy for them. plus you can make tons of power with that turbo. that extended fin design is something else boy. i had one and sold it but now i have a hx40 that is going on my supra.

[StreetRX7]

why don't you go with the holset hx50? they are pretty cheap and you can find the rebuild kits really easy for them. plus you can make tons of power with that turbo. that extended fin design is something else boy. i had one and sold it but now i have a hx40 that is going on my supra.

I'm not useing that turbo in the picture.... To damn big for the streets... i WAS JUST showing how big it is next to ah rotary motor... lol. I'm actually going with ah BW turbo... Spec's I wont discuss.. But I like the power ban an setup they come with..

[3tc power]

yeah the Borg Warner turbos are high dollar and top of the line sh!t today. holset and BW
share the same technolgy with the extended fin comp wheels and the BW have BIG shaft so they will take a beating.

[StreetRX7]

yeah the Borg Warner turbos are high dollar and top of the line sh!t today. holset and BW
share the same technolgy with the extended fin comp wheels and the BW have BIG shaft so they will take a beating.

Yeh Luis aka papito got me ah great deal on the turbo I need.. ;) :cool:

I'm getting it with race cover.. ;) :)

Yeh some of the fastest import running those turbo's rite now... They are bigger an spool just as fast as ah smaller turbo...

[RedBull]

interior looks real good. not too much on the blue. but very good condition.

[StreetRX7]

interior looks real good. not too much on the blue. but very good condition.

Trust me I dont like the painted interior pieces.. But I gotta live with it .. ..

Yeh interior came out better than I taught...

If you look at the 2nd interior picture you can see my fire extinguisher ... lol..

[VIZuki]

glad to see your getting your car back in tip top shape..and not leaning towards a typical island statistic car.:thumbsup:

[RedBull]

glad to see your getting your car back in tip top shape..and not leaning towards a typical island statistic car.:thumbsup:

that's not the same car. this is the new beast.

[VIZuki]

thats his old RX that was next to the Jeep.

[RedBull]

thats his old RX that was next to the Jeep.

nope...... this one is newly acquired.. been in hibernation for a long time. glad to see her getting a new lease on life.

[92vr4]

Thas the one tha pahtnah had, and he had geh in a accident?

[Tekknikal]

looking good :cool:

[StreetRX7]

glad to see your getting your car back in tip top shape..and not leaning towards a typical island statistic car.:thumbsup:


Whats that supposed to mean... ??? :rofl: :rofl:


Thas the one tha pahtnah had, and he had geh in a accident? :

YES



looking good :

Thanx...

[92vr4]

U gon sell it when it done? Cuz i might be interested

[cruzan7m]

U gon sell it when it done? Cuz i might be interested

2jz for life huh!...lol I knew it all along...slut! you can't be satisfied with one car, you want all the fast cars...lmaol! Nah just j/k. Didn't i tell you that you can't handle an FD.:rofl::rofl::rofl::rofl::rofl::rofl:

[StreetRX7]

U gon sell it when it done? Cuz i might be interested

Anything is for sale for the rite price.. :rofl: :rofl:. Its gonna be proven before it goes forsale... :cool:

[StreetRX7]

2jz for life huh!...lol I knew it all along...slut! you can't be satisfied with one car, you want all the fast cars...lmaol! Nah just j/k. Didn't i tell you that you can't handle an FD.:rofl::rofl::rofl::rofl::rofl::rofl:


Nah he just saw 2 mitsu broke down over the weekend.. lol J/K...

Any car is a good car to race as long as you know alot about the car you building.. But then again you might know alot but not good at tuning.. :rofl: :rofl:
Hmmmm!!! made sence.. :dunno: ..

[92vr4]

Boss! I always reppin 2j! I ain geh nuthin against rx though, i mean i used to own one. Just dooooooont evah park them up for more than a week or two lol

[StreetRX7]

Boss! I always reppin 2j! I ain geh nuthin against rx though, i mean i used to own one. Just dooooooont evah park them up for more than a week or two lol


You got jokes.. :rofl: :rofl:.. That was years ago... BAI!!!.


Even the goat Be on the hill for weeeks an It start rite up when they rdy to drive it... :cool:

[VIZuki]

Whats that supposed to mean... ??? :rofl: :rofl:




YES





Thanx...

Most leave cars to sit and rott in there own glory thats what I mean...or have grass growing around them for years....then bees and wasps start building nest in them.

[RedBull]

Most leave cars to sit and rott in there own glory thats what I mean...or have grass growing around them for years....then bees and wasps start building nest in them.

well that particular car has been sitting for a few years

[VIZuki]

well then as I stated before then again. At least now it won't begin to start rotting if it hasn't already.

[StreetRX7]

Most leave cars to sit and rott in there own glory thats what I mean...or have grass growing around them for years....then bees and wasps start building nest in them.

+1 :) Alot of ppl do that here on STX... This car was down only because the owner was injured an wasn't able to repair it....

[VIZuki]

see he understodd what I ment^^^^ azz!!!

[92vr4]

:wiggle:

[RedBull]

see he understodd what I ment^^^^ azz!!!

i was just stating the facts ASS.......

[StreetRX7]

i was just stating the facts ASS.......

:rofl: :rofl:

There was 3 to 4 RX7 sitting in grass for the pass 2 yrs when I came back... I went to buy them they told me its not forsale.. :rofl: :dunno: :confused: .. . Yeh but its not working catching rust :rofl: an its not for sale...?? :rofl::dunno:

But now most of them is in progress of getting fix .. which I fixed most of them.. :rofl:

I'm eyeing a 1st gen its in very good condition I wish some one would buy it.. So I can fix it.. TURBO BAI!!!! ;) :)

There is A RED 90 TurboII I saw this morning looking really good freshly painted....

[RedBull]

im looking for something small like a 1rst gen or a miata. i wanna make use of that rear end i have..... wait 92vr4 will have a field day with that one:rofl:, THE REAR HALF CHASSIS WITH FORD 9" i have sitting there going to waste.

[92vr4]

Damn! I was gonna tear that sentence up!

[StreetRX7]

Damn! I was gonna tear that sentence up!

:rofl: :rofl:

[StreetRX7]

Did some more work on THE BEAST 2day .. For couple hrs.. Took KOYO radiator,A/C,POWER STEERING out ... Getting it rdy for removal of motor... I also took the Harness on the driver side an replace it.... The owner b4 butchered it up bad bad did I say bad!!!!...:rofl:

I also reinstall the seat after I shampoo the carpet an vacuum it again...... look an smell very clean.. .!!!!!.

If I have time 2morrow I wil remove Front bumber To get intercooler out an it will be forsale.. Going with BIGGER Intercooler... Thats one of 2 things I'll be upgrading ;).... The other is the turbo...;)

I have so much to do its rediculous ....:rolleyes: :( ..
But in the end it should all work out... Well I hope... :rofl: :rofl:

[DomesticChiney]

im looking for something small like a 1rst gen or a miata. i wanna make use of that rear end i have..... wait 92vr4 will have a field day with that one:rofl:, THE REAR HALF CHASSIS WITH FORD 9" i have sitting there going to waste.

lol. How old is that ford rear axle?

[RedBull]

lol. How old is that ford rear axle?

its a narrrowed 9" with 4.56 spool moser axels and willwood disks. its a full rear half with 4 link and everything. it came out of a 68 drag camaro.. we actually bought the car just for the rearend. the rest of the car is in pieces in the dump.

[92vr4]

I got a rear axle on my car too!!

[RedBull]

this one can actually handle power:)

[92vr4]

My axles can handle power. The 8 second pass was done with stock axles. Its the transfer case that sucks ass.

[RedBull]

Damn! I was gonna tear that sentence up!

we know you like to tear guys rear ends up. its OK your life chooices are yours to make.:gay::kekekegay:

[cruzan7m]

we know you like to tear guys rear ends up. its OK your life chooices are yours to make.:gay::kekekegay:

:lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao:: lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::l mfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lm fao::lmfao::lmfao::lmfao::lmfao::lmfao::owned::own ed::owned::owned::owned::owned::owned::owned::owne d::owned::owned::owned::owned:

[92vr4]

we know you like to tear guys rear ends up. its OK your life chooices are yours to make.:gay::kekekegay:

I think u need to read my post again. I never said anything about tearin up guys rear ends sir. I said i would tear up the sentence.

Ever heard of "eyes only see what they want to"

:)

[StreetRX7]

I think u need to read my post again. I never said anything about tearin up guys rear ends sir. I said i would tear up the sentence.

Ever heard of "eyes only see what they want to"

:)

It was a typing error on his phone ... :rofl: :rofl:

EDIT: You guyz really know how to FU(K my threads up... :rofl: :rofl:

[StreetRX7]

Car came with 2 cat back system.. A Blitz NUR Spec an a HKS Dragger system...

I like to HKS better because its most quite... But the baffle inside is FU(Kup..Picture below.. I think I can fix it ..lol.. well warren..:eek: ???

http://www.streetseen.vi/gallery/data/500/medium/MUFFLER1.JPG

Its ah lil dirty sat for 2 yrs.. lol..

http://www.streetseen.vi/gallery/data/500/medium/MUFFLER2.JPG

And this is the Blitz NUR Spec...

http://www.streetseen.vi/gallery/data/500/medium/MUFFLER.JPG

Should I fix the HKS Dragger or go with the Blitz NUR Spec... :confused: ????
which Blitz dont look to bad.. lol.. :dunno:

[RedBull]

It was a typing error on his phone ... :rofl: :rofl:

EDIT: You guyz really know how to FU(K my threads up... :rofl: :rofl:

sorry i just couldnt help it. i knew he would have a field day with it so i had to turn it back around on him. he made it too easy.:rofl:

[StreetRX7]

sorry i just couldnt help it. i knew he would have a field day with it so i had to turn it back around on him. he made it too easy.:rofl:

:rofl: :rofl:

[92vr4]

U clean that exhaust?

I would go with whichever one doesnt make that raspy civic sound

[92vr4]

Whichever u dont want, ill take

[StreetRX7]

U clean that exhaust?

I would go with whichever one doesnt make that raspy civic sound

They both dont... its more like ah deep sound... I also run an extra muffler in the mid pipe... Just to kill more of the raspy civic sound..

I think I'll try Blitz NUR Spec.... if I dont like I will fix HKS Dragger ;)

[DomesticChiney]

Wonder what my car would sound like if I put those on..... lol

[RedBull]

the rx for speedfab runs a hks super dragger with a turbo small block for making 1000hp and it sounds great. go on streetfire and search speedfab.

[StreetRX7]

the rx for speedfab runs a hks super dragger with a turbo small block for making 1000hp and it sounds great. go on streetfire and search speedfab.

I like the HKS Dragger better but I dont have time to take it to fix @ the moment... So Blitz would have to do for now... ;) :) ..

[StreetRX7]

Pulled motor 2day No picture sorry...

Double check motor ...I didn't pull it apart like I said i would ,I spoke to the guy who build it.. An motor got perfect compression looks like it was built very good... So I have couple lil things I gotta try out on motor B4 I install it.....

Looks like the car gonna be up sooner than I expected it to be... ;)

[Tekknikal]

great, so itll be at the next meet ? :fingersx:

[StreetRX7]

great, so itll be at the next meet ? :fingersx:

I wish not looking like this.... :rofl: :rofl:

http://www.streetseen.vi/gallery/data/500/medium/car.JPG


I remove motor an front bumper to finish rewireing the car ... I also remove old intercooler kit I'm gonna replace with a bigger one ... ;) :) Been working at this hard.. I repolish Koyo Radiator looking nice.. I'm also gonna power wash engine bay B4 Motor in reinstall.... I would love to take picture of the motor on stand but I'm trying out some new stuff an dont want it out there yet... Doing some R&D on the new stuff B4 I try it on other motor.. I'm kinda the lab rat ... I rather fu(k MY motor up an not ah customers..... Dont get me wrong I wont do this to any customer motor unless its proven with my satisfaction...

EDIT: Next new project on the way soon!!!!!!!! Hint TurboII

[freddie_vi]

wow....keep up the good work...!

[VIZuki]

well better to be the lab rat than to have had rats chewing on everything.

[StreetRX7]

well better to be the lab rat than to have had rats chewing on everything.


:lmfao: :lmfao: :lmfao: Thats ah good one..

[StreetRX7]

wow....keep up the good work...!

Will do....

I like buying clean body car ... Which this is not to bad.. Wish I was around when they started to butcher this car up :rofl: I would of save them from alot of head ache... The hardest part is trying to put all the wireing back to stock.. I even had to pull off the fenders..:mad:. lol... :rofl: CRAZY $HIT!!!!!! But its all in learning....:)

[VIZuki]

i was serious bruds..now shit won't go unnoticed cause you'll always be around it..I hate to see chewed wires and rats don't start doing that a week or even 3 weeks into a car sitting..rats are pretty smart they check and watch to make sure the area is safe...thats the best way to know if a car has sat for a long time rats and rat shit. Rats are kinda like journalist they let you know whats been up.LOL

[RedBull]

I wish not looking like this.... :rofl: :rofl:

http://www.streetseen.vi/gallery/data/500/medium/car.JPG


I remove motor an front bumper to finish rewireing the car ... I also remove old intercooler kit I'm gonna replace with a bigger one ... ;) :) Been working at this hard.. I repolish Koyo Radiator looking nice.. I'm also gonna power wash engine bay B4 Motor in reinstall.... I would love to take picture of the motor on stand but I'm trying out some new stuff an dont want it out there yet... Doing some R&D on the new stuff B4 I try it on other motor.. I'm kinda the lab rat ... I rather fu(k MY motor up an not ah customers..... Dont get me wrong I wont do this to any customer motor unless its proven with my satisfaction...

EDIT: Next new project on the way soon!!!!!!!! Hint TurboII

maybe another 2 or 3 weeks and you will be tuning mine. and i have no secrets so i will say once mine is tuned to 15psi i will buy my rims. after that i am buying alcoholinjectionsystems.com stage 2 kit can we get 22 psi out of it? next ime i will run with slicks dont worry. but i think we can get 22 to 25 psi out of methanol on stock motor. lets have the fastest street driven stock motor rx7 in the caribbean.

[StreetRX7]

i was serious bruds..now shit won't go unnoticed cause you'll always be around it..I hate to see chewed wires and rats don't start doing that a week or even 3 weeks into a car sitting..rats are pretty smart they check and watch to make sure the area is safe...thats the best way to know if a car has sat for a long time rats and rat shit. Rats are kinda like journalist they let you know whats been up.LOL

I was serious too thats why it was funny... because remember In some post back I told you guyz there was rat chewing up the wires B4 I pick the car up... I also pull the fenders off an rat was in there too chewing up wires..:rofl: :rofl: I fix 90% of the wireing everything works lights/wiper/turn signal etc..

[StreetRX7]

maybe another 2 or 3 weeks and you will be tuning mine. and i have no secrets so i will say once mine is tuned to 15psi i will buy my rims. after that i am buying alcoholinjectionsystems.com stage 2 kit can we get 22 psi out of it? next ime i will run with slicks dont worry. but i think we can get 22 to 25 psi out of methanol on stock motor. lets have the fastest street driven stock motor rx7 in the caribbean.

20 psi is more than e-nuff 15psi street 20psi track You still won't have traction even with slicks.. lol...

I'm also going meth injection once I get this car up an going...

[VIZuki]

AT least another person to prove this..I've told him this time and time again....he'll just have to learn to flutter the gas off and on lightly....that or weigh it down some in the rear. Alot of guys spin tires the whole way down the track and are use to it..some just have to learn it. I hear really good thing with Meth injection good route.

[92vr4]

20 psi is more than e-nuff 15psi street 20psi track You still won't have traction even with slicks.. lol...

I'm also going meth injection once I get this car up an going...

Leh me know where u get your kitcuz im looking into the same route

[VIZuki]

why don't you upgrade a few stuff before you just go meth injection VR4...all jokes aside you gotta know what the fuck your doing and I don't mean have someone hook it up for you then forget about...I'd read up on it study it..copy and print some print outs about it..pro's and con's. read up on it cause you have to know how to tune flush it right whe nremoving etc. CO2 is also one way to go about it not as cool for intercooling and high psi's but.
You can go either way with it, but I personally dont like the idea of relying on the meth to go outside the limits of your injectors.

The water/meth injection is a great tool and is almost becoming a must on any turbo vechile for its "intercooling" effect and its abilty to decrease the chances of knock/preignition. You dont HAVE to tune the water/meth injection to see gains from it, as gains are seen from its intercooling effect. Another benfit of the Water/meth inection is the abilty to run more boost as the water/meth injections acts as race gas during injection. Califcarm over on Mr2oc.com was only able to hit about 17 on 91 octane, but with the water/meth injection, he was able to run 20psi.

But there are of course more gains to be had by tunning the water/meth injection by running a "leaner (12.0-12.5)" AF ration, more ignition advance, and more boost to tune for. The only problem with doing this is, what happens when you pump fails, or the nozzle gets clogged, etc. You WILL blow you motor if tuned for high boost with added igntion advance, and a lean 12.0-12.5 AF, if you have injection failure.

What will you be tuning this with, and on what engine. Street can do this cause he can rebuild a motor and he has two fuel pumps which I'm sure back each other up tremendously. all this can happen if your not tuned right for it. This is why I also said you might want to upgrade a few stuff before you just jump into Meth injection my bwoy!!But good luck either way bruds. :thumbsup: your still a queer though lol

[StreetRX7]

Well said...^^

Its alot of pro's an con's with this meth setup.. I love straight race gas C-16... but for everyday street racing Meth injection will have to do... pump gas is good for about 16 to 18psi on a rotary..

I have seen as high as 20 psi but injectors was maxed out.. 99 to 100% .. thats with 850cc an 1600cc injectors...

My max with meth injection would be 18psi to 20psi max just to keep motor nice an cool without pinging... Like VIzuki said pump goes bad an the number one thing that goes wrong with meth injection is the nozzle gettin CLOG... Equals blown motor

I'm not relying on meth injection i'm useing it as ah help to keep intake charge cooler which this is what it was made for.. But my car will be properly tune for the boost i'm planning on running then meth like I said would come on as a helper... :cool:

[VIZuki]

aight cool then yeah this is why i was telling VR4 to look into upgrades on parts that need upgrading and even trying CO2 intercooled or nitrous(though this can be as costly even more than running this thru the intake charge). Don't mess with this VR4 unless u have a spare motor or a builder on hand..and if your car is a daily driver I wouldn't look into something like this..but the dream is still there so if you still do it be careful with it and like streets plans to come in on the meth injection rather than running it all the time constantly.

[92vr4]

I dont want meth so i can push more boost and lean out my afr to rwly on it. I want meth cuz it acts like a higher octain gas. Which will help me run cooler. And safer at higher boost

[StreetRX7]

As the drama continue.. :mad: :dunno: what they was thinking..
People please when doing stand alone DONT CUT ANY BODY HARNESS PLEASE... :mad: :mad:

I pull driver side fender

http://www.streetseen.vi/gallery/data/500/medium/wire.JPG

Then I came across this :mad: :mad: :dunno: WHY

http://www.streetseen.vi/gallery/data/500/medium/wire1.JPG

[92vr4]

That looks professionally done

[StreetRX7]

But when i'm done its going to be better than new.. :)... I'm doing it by the books.. lol.. :) If I sell the car Wont have no problems.. ;) I had to take this car to pieces to make sure everything is good... lol...

But on the a GOOD note I TESTED everything else an its working great.. This is the last of the body harness repairs... :thumbsup:

[StreetRX7]

That looks professionally done

A$$ :rofl: :rofl:

[VIZuki]

I dont want meth so i can push more boost and lean out my afr to rwly on it. I want meth cuz it acts like a higher octain gas. Which will help me run cooler. And safer at higher boost

Then you run a careful mixture of C-16 and 91 or 93 pump gas..reason is C-16 can get expensive but if thats the case then you'd be running it more than street..or it would be activated more often. Or just buy C-16:dunno:

[RedBull]

have you ever driven a rear wheel drive aside from that samurai? i like how the guy who wont own anything but AWD gives advice on how to drive a RWD.:rofl::rofl::rofl:

[RedBull]

first off the meth injection only comes on at a predetermined boost. so if you have your car tuned for 15psi the meth will not be injesting if you have it set for higher boost. you can set it to start at 15 and max out at say 20 so once you run less than the cut in point you wont be injecting methanol. the best kit i have found to date is a proggresive injection that you can actually set maps with a laptop, its fully tunable. and pretty much a plug and play operation. http://www.alcoholinjectionsystems.com/p102/Stage-2-Adjust.-Progressive-Trunk-Mount-Water-Methanol-Injection-System/product_info.html

[VIZuki]

This is true but like you stated you can set..so you can set the perimeters to whatever you want really..your discribing the way street plans on doing this which is actually not an issue so first off PnP yeah if thats how its set up for it some kits aren't PnP.

[RedBull]

ok im done. when you actually get your hands dirty gimme a call.

[VIZuki]

first of know the principle behind it is one factor...when I get my hands dirty dude first of yo pops is the car mechanic if anything I give props for him and showing you what he knows. me I learned by doing it ain't no one show me how to do this and that well I liesome people showed me a few tricks) but the same as you studying and reading and jumping in. Its not hard to follow directions of something if you have the tools to do it and the machines to tweek something that you might need to grind to fit. So if you want to really be a batty bwoy then be a batty bwoy..you love to argue and thats how you are so I really don't pay you no mind"get my hands dirty" what a trip any vehicle I've ever owned was repaired by myself big or the help of people that I know....not you so don't act like you know when I do or don't be working on any of my rides. yeah it was me who informed people of you needing help with tuning your ride from way before your ras got on this site so wheres the respect and the thanks. Yeah "I give respect to where respect is do" sounds more like an excuse not to say shit.

[StreetRX7]

Not to jump in but REDBULL did 100% of the work on his car so far.. I haven't turn a screw in his car to date... Even the tuning he did... All I did was point him in the rite direction thats it.. :cool:

[92vr4]

I wish i could work on my own car. I can barely put gas in without breaking something

[StreetRX7]

I wish i could work on my own car. I can barely put gas in without LEAKING FUEL

Fixed!!!!! :rofl2:

[VIZuki]

Not to jump in but REDBULL did 100% of the work on his car so far.. I haven't turn a screw in his car to date... Even the tuning he did... All I did was point him in the rite direction thats it.. :cool:

Which is easy stuff un bolting and screwing in..and you told him what to do which is far from doing it yourself or trial and error..so before anyone says let me know when you get your hands dirty is bullshit..if you wanna get personal like that then we can get personal but realize when comments aren't drawn toward you but you stiil feel to dis or say something to someone that your probably going to get a sour reply back:rofl: every single time dis man tink I dissing an RX when I sit there and back it up with info just as much but deh man want to talk shit about my car which to me is a ass move or you just like arguing and being a dick....

[StreetRX7]

Which is easy stuff un bolting and screwing in..and you told him what to do which is far from doing it yourself or trial and error..so before anyone says let me know when you get your hands dirty is bullshit..if you wanna get personal like that then we can get personal but realize when comments aren't drawn toward you but you stiil feel to dis or say something to someone that your probably going to get a sour reply back:rofl: every single time dis man tink I dissing an RX when I sit there and back it up with info just as much but deh man want to talk shit about my car which to me is a ass move or you just like arguing and being a dick....

Koo!!! :)

[RedBull]

Which is easy stuff un bolting and screwing in..and you told him what to do which is far from doing it yourself or trial and error..so before anyone says let me know when you get your hands dirty is bullshit..if you wanna get personal like that then we can get personal but realize when comments aren't drawn toward you but you stiil feel to dis or say something to someone that your probably going to get a sour reply back:rofl: every single time dis man tink I dissing an RX when I sit there and back it up with info just as much but deh man want to talk shit about my car which to me is a ass move or you just like arguing and being a dick....

ok listen up. I haven't said shit about your car. im all for anyone building any car. but the fact is. ii have been into cars since birth. yes I learned a whole lot from my father who I will come right out and say is a mechanical genius. but my father knows way less than I do about imports. which is where my heart is. all that I know about v8's I can attribute to my fathers help. but all I know about imports I learned on my own. period. unlike you who just got into the car scene (which I am always glad to see people getting into) I have always been into cars. before I worked in hess all I really did was work on cars.. randm jobs from porting and polishing to full engine rebuilds. and keep in mind this was from the time I was 16. the first engine I dissasembledd was for my bug when I was 14. now as street stated. noone has put a hand on my car besides me and my father. yes the engine was put in by my father only because I couldn't take the time off of work to go to florida to do it. yes I will definitely need streetrx's help tuning the car as this is something I am not familiar with. so don't take too much offense when I say get your hands dirty although I did meen it just how you took it. you know I will lend a hand to anyone that asks. especially you.... I feel I have said more than enough.. so for now im done typing. you need help gimme a call... until then.......

[StreetRX7]

Ok going under surgery here are my tools.. lol.. Be back later with results.. :) :cool:

http://www.streetseen.vi/gallery/data/500/medium/tools1.JPG

[RedBull]

you really do love wiring dont you. better you than me.

[VIZuki]

Ok going under surgery here are my tools.. lol.. Be back later with results.. :) :cool:

http://www.streetseen.vi/gallery/data/500/medium/tools1.JPG

Hey street don't you have a smaller sodering iron that thing looks hugh yo...well I guess if it works then it works aight...:rofl: So what needs to get fused together. Thats alot of flux you putting togeher a robot or something yo.

[92vr4]

Scissors and scotch tape boss!!!! Fudge all ah dis soldering shit



Edit: no i dont ise scotch tape on the vr4

[StreetRX7]

you really do love wiring dont you. better you than me.

Yes I do.. ;) :) Practice make perfect...

Hey street don't you have a smaller sodering iron that thing looks hugh yo...well I guess if it works then it works aight... So what needs to get fused together. Thats alot of flux you putting togeher a robot or something yo. .

Belive it or not it works great needed extra heat... :rofl: lol
Plus I borrowed it from ah friend.. :rofl: :rofl:
I bought extra sodering because I have another TurboII to wire up in 2 weeks....


Scissors and scotch tape boss!!!! Fudge all ah dis soldering shit.


We know that why your vr4 run the way it does.. lol.. :rofl:

[StreetRX7]

Ok surgery was ah success :rofl: Did get every thing in order I hope ..lol..

Before picture..
http://www.streetseen.vi/gallery/data/500/medium/wire1.JPG

I had to cut harness complete in order to get it all even out an rewire an soder it all 2gether then heat shrink... then tape it all up looking factory... ;) :)

After picture's... sorry for poor quality pic.
http://www.streetseen.vi/gallery/data/500/medium/wire2.JPG

More
http://www.streetseen.vi/gallery/data/500/medium/wires.JPG

[92vr4]

very nice

[StreetRX7]

very nice

WOW is that ah compliment..??? :rofl: :rofl: Thanx Mi BAI!!!

[92vr4]

dont get used to it

[StreetRX7]

dont get used to it

:rofl:

[VIZuki]

Ok surgery was ah success :rofl: Did get every thing in order I hope ..lol..

Before picture..
http://www.streetseen.vi/gallery/data/500/medium/wire1.JPG

I had to cut harness complete in order to get it all even out an rewire an soder it all 2gether then heat shrink... then tape it all up looking factory... ;) :)

After picture's... sorry for poor quality pic.
http://www.streetseen.vi/gallery/data/500/medium/wire2.JPG

More
http://www.streetseen.vi/gallery/data/500/medium/wires.JPG

Nevermond now I see why a coupling would have been a bad idea even if you has used electro tape after..looks good but most of all looks clean!!!

[StreetRX7]

Nevermond now I see why a coupling would have been a bad idea even if you has used electro tape after..looks good but most of all looks clean!!!

Thanx!!! Its better I did it that way ..As for electro tape I did used after to make it look more neat.. But I had alot of sodering to do an heat shrink... I hate loose wire an untidy engine bay very unprofessional,I like to take my time an do it right the 1st time... :) :cool: I Dont want to be driven down the road an my car shorts out.. lol.. Or on ah ride out..:rofl: This car is going to be better than new when i'm done ,I'm not looking for much power about 400hp to 500hp max...

[92vr4]

500 is alot in a rx

[VIZuki]

yep 1st time and last time..500 is about right there in the middle and a built good strong high HP motor at that HP will be reliable...

[StreetRX7]

500 is alot in a rx

Not reallybut its much safer on the street last longer/more reliable.... I can get 500 hp @ about 20 to 22 psi... I made 478 @18 psi yrs ago... DYNO TUNE .....The BW turbo I'm going with this time around 3tcpower can tell you its amazing.. its ah lil bigger than what I have now an spool faster... Better power range all around.. So 500hp @ those boost level is reachable... MY turbo setup is old more than 5yrs old... They are way better/new technology out there now an design of turbos... ;) :)

[StreetRX7]

yep 1st time and last time..500 is about right there in the middle and a built good strong high HP motor at that HP will be reliable...

:+1: My motor last 3 yrs an more @ those boost level an HP racing every summer an many events... I dont try to kill it like running 30 + psi ....500hp in ah rx7 can get you low 11's to high 10's Thats great for the streets...

[92vr4]

Eh streetrx, if i get a standalone, you could wire it up for me?

[StreetRX7]

Eh streetrx, if i get a standalone, you could wire it up for me?

what standalone..??? what kind.???. you better get ah AEM BAI!!! PnP save up some money for it dont buy the AMP yet...:rofl:

[92vr4]

SDS EMS. AEM can suck my balls, two times. Looks pretty straight forward, just replacing sensors. But ill manage to fork it up if i do it.

[StreetRX7]

SDS EMS. AEM can suck my balls, two times. Looks pretty straight forward, just replacing sensors. But ill manage to fork it up if i do it.

I dont like SDS an the ppl/guyz here who has it is switching over to HALTECH... :) But if you really want it We can put it in an try it out... :cool:

[92vr4]

Well its a pahtnah ah mine that geh it, so he sellin it to me cheap. And we both know that haltech dont work for my car. He had it in his car runnin a single turbo setup with 600 horses. He had a 92 vr4 also.

[StreetRX7]

Well its a pahtnah ah mine that geh it, so he sellin it to me cheap. And we both know that haltech dont work for my car. He had it in his car runnin a single turbo setup with 600 horses. He had a 92 vr4 also.

He would be ah good candidate to do the wiring .. lol.. ;) he knows alot about mitsu.. :)

Haltech CAN work just not full standalone... FUEL ONLY....:cool:

[VIZuki]

PNP makes an hour or more turn to minutes..

[92vr4]

But hes in the states

[DomesticChiney]

Thats just alot of boost right there... Luckly I don't need that much to give me power... My damn supercharger is noisey enough already. Problem with Centrifigual superchargers, you can almost tell how much boost that person is runnging by the wistle they make.

[cruzan7m]

Scissors and scotch tape boss!!!! Fudge all ah dis soldering shit



Edit: no i dont ise scotch tape on the vr4

So that's why my sista can't find any duct tape on the damn island.:rofl::rofl:

[cruzan7m]

Thats just alot of boost right there... Luckly I don't need that much to give me power... My damn supercharger is noisey enough already. Problem with Centrifigual superchargers, you can almost tell how much boost that person is runnging by the wistle they make.

That wistle would intimidate the crap out of people, and would think twice about racing you....:rofl:

[StreetRX7]

Thats just alot of boost right there... Luckly I don't need that much to give me power... My damn supercharger is noisey enough already. Problem with Centrifigual superchargers, you can almost tell how much boost that person is runnging by the wistle they make.


If I was N/A I wont need that much boost .. Remember your car was N/A an you charge it up.. Turbo cars come with lower compression than N/A cars,So they would need more boost to make power...;) Plus your V8 big displacement... :rofl:

[StreetRX7]

Update on this motor its just about complete.. waiting on 1 motor mount bracket An polyurethane mounts.. Then she should be rdy to drop rite in ..picture below ;)

http://www.streetseen.vi/gallery/data/500/medium/motor1.JPG

BONUS an NO this is not the turbo i'm going to run..

http://www.streetseen.vi/gallery/data/500/medium/motort.JPG

[cruzan7m]

She go be ready for when i come home....lol want to see how it respond with a different turbo setup, and tune.

[VIZuki]

If I was N/A I wont need that much boost .. Remember your car was N/A an you charge it up.. Turbo cars come with lower compression than N/A cars,So they would need more boost to make power...;) Plus your V8 big displacement... :rofl:

This is true but his car came with 9.3:1 compression ratio I think so its a great platform to handle boost boost in Force induction or N/A set up..no its not your 8.?:1 range but less likely to blow up motor..thats why he's running at 8 pounds but anothe thing is with his higher compression he doesn't really need to and if he does plan to stay that high and run forged internals in the future..the more boost he runs the greater the out come from say a motor of the same model with higher boost pressure...unless you really like running high numbers in boost to make power, it isn't required to make power in a high compression engine.:dunno:

Oh and Chiney when you do go to say 12psi it would be a good idea to run better internals if you don't have it already..that or your Fuel mapping on your Engine management better be pretty good and on key to the point cause you'll have to play with your +/- timing ratios don't want it detonating. On a better note I need to talk to you bout your supercharger some time trying to figure out some stuff with bracket mounting and so forth......

[StreetRX7]

This is true but his car came with 9.3:1 compression ratio I think so its a great platform to handle boost boost in Force induction or N/A set up..no its not your 8.?:1 range but less likely to blow up motor..thats why he's running at 8 pounds but anothe thing is with his higher compression he doesn't really need to and if he does plan to stay that high and run forged internals in the future..the more boost he runs the greater the out come from say a motor of the same model with higher boost pressure...unless you really like running high numbers in boost to make power, it isn't required to make power in a high compression engine.:dunno:

Oh and Chiney when you do go to say 12psi it would be a good idea to run better internals if you don't have it already..that or your Fuel mapping on your Engine management better be pretty good and on key to the point cause you'll have to play with your +/- timing ratios don't want it detonating. On a better note I need to talk to you bout your supercharger some time trying to figure out some stuff with bracket mounting and so forth......


And water injection would be ah great help too... less detonation ;) kool air temp charge.. :)

[StreetRX7]

She go be ready for when i come home....lol want to see how it respond with a different turbo setup, and tune.

I'm shooting for end of next month or begining of march.... If everything goes to plan.. Only major part i'm waiting on is turbo... I also have alot of lil fabrication I need to get done.. aka Welding lol... :mad: I will get a welding machine later in the year..

[DomesticChiney]

Oh and Chiney when you do go to say 12psi it would be a good idea to run better internals if you don't have it already..that or your Fuel mapping on your Engine management better be pretty good and on key to the point cause you'll have to play with your +/- timing ratios don't want it detonating. On a better note I need to talk to you bout your supercharger some time trying to figure out some stuff with bracket mounting and so forth......


Yea my internals are all built to handle in excess of 600HP so I'm straight on that end. My biggest problem is Fuel. I have upgraded Fuel Injectors and Pump but my rails and fuel hat are still stock. I'm confident that my current set up will hold it together for a few dozen more ponies. We'll see.

I'm also getting a brand new tune putting in the ECU with 3 different setting, all changeable while driving. 1 tune for daily driving, another for racing with race fuel or methanol, and a "kill" tune that I'll set in place when the car is parked incase someone try and steal it.

Oh and anytime. Mounting the Superchargers Head Unit is the easy part.... Playing with the pullies, belt, and tubing...... thats the nightmare! :eek:

[RedBull]

I'm shooting for end of next month or begining of march.... If everything goes to plan.. Only major part i'm waiting on is turbo... I also have alot of lil fabrication I need to get done.. aka Welding lol... :mad: I will get a welding machine later in the year..

what kinda machine you looking for Arc Mig or Tig

[StreetRX7]

what kinda machine you looking for Arc Mig or Tig

Dont know yet...?? mostly to weld exhaust.. am ah lil ALUMINUM for intercooler piping.. Dont know shit about welding machine....

[RedBull]

Dont know yet...?? mostly to weld exhaust.. am ah lil ALUMINUM for intercooler piping.. Dont know shit about welding machine....

tig would be best. mig with argon would be fine but you would have to get a nice machine to weld aluminum. and with mig you would have to keep swapping out the wire. im trying to get the tig setup for our new machine.. will llet you know if I come across one..

[VIZuki]

Hey REDBULL you wouldn't happen to have a spring puller to remove springs off of struts..I'm looking for one to swap out the stock springs and throw in the Tein S-techs I ordered..leh me know if you have if not I might have to go talk to Tom Jaffurs bout it..he's got one for the Lotus Elise.....get back at me if you can. Or whats your number so I can hit you up and find out...Seems like sweet is sleeping or something so I can't get ahold of him.

[StreetRX7]

tig would be best. mig with argon would be fine but you would have to get a nice machine to weld aluminum. and with mig you would have to keep swapping out the wire. im trying to get the tig setup for our new machine.. will llet you know if I come across one..

kool :thumbsup:

[StreetRX7]

Update on this motor its just about complete.. waiting on 1 motor mount bracket An polyurethane mounts.. Then she should be rdy to drop rite in ..picture below ;)

http://www.streetseen.vi/gallery/data/500/medium/motor1.JPG

BONUS an NO this is not the turbo i'm going to run..

http://www.streetseen.vi/gallery/data/500/medium/motort.JPG


Motor will be going in next weekend I hope..:). still waiting on mounts an metal bracket.. I gotta pick clutch up this weekend....

I pulled haltech out of box will be doing some wiring soon ,I'm also going to do some continuity test on the wires I put 2gether to make sure its rite b4 I put finder back on ... Been way to busy working on land,building motors,an project... never ending .. Not E-nuff time during the day it goes by to fast...lol..

[VIZuki]

I'm assuming its a six puck sprung......ACT maybe or how bout EXEDY

[StreetRX7]

I'm assuming its a six puck sprung......ACT maybe or how bout EXEDY

Yes 6 puck ACT Unsprung little aggressive but I have to get this one....Been running this clutch setup for yrs.. never let me down... ACT EXTREME PRESSURE PLATE... cheap an good for what I NEED

EXEDY wont help me unless I go twin disk which cost to damn much..lol..

[3tc power]

i like the new design of the act clutches to. no more dual daiphragm that sticks when when you really need it. the new design is is heavy duty and and take lot more beating. very good choice.

[StreetRX7]

i like the new design of the act clutches to. no more dual daiphragm that sticks when when you really need it. the new design is is heavy duty and and take lot more beating. very good choice.

Yeh BAI!!! Thanx

An best of all its a SINGLE DISK clutch setup... Only other single disk clutch setup is just as good or better is ... RPS clutch they use them on supra making upward 700 to 900 HP...

[92vr4]

What kinda clutch should i get?

[StreetRX7]

What kinda clutch should i get?

TILTON clutch triple disk is perfect for you... good for a life time.. But the only thing is the price..its about $5,000 shipped to STX :rofl: :rofl:

I'm sure you can go the one of those VR4 forum an see whats the best clutch setup everyone running an having good luck with.. ;) :cool:

[92vr4]

I gon order two jus in case

[StreetRX7]

I gon order two jus in case

:thumbsup: Good i'll take one then i'll help you with yours for free.. :rofl: :rofl:

[StreetRX7]

Update!!!!!!! Been doing some continuity test 2day on the wire I soder an it was a Success :thumbsup: So its good to go on the IGNITION ....
I put the fender back on the car.... 2 morrow I will do some more testing on Tach,water temp,oil pressure,speedo, an reverse light...That for all the gauges to work like factory with the haltech..... Its would of been easier if he didn't butcher up the harness... :mad: But its ah good challenge for me... << :crazy: :rofl: will have photo's of harness both haltech an stock harness....

[VIZuki]

I gon order two jus in case

I think you could get away with this one from ACt for your car
http://www.advancedclutch.com/prod_images/disc_SS_lg.jpg

or six puck if you plan on building up power but they do grab very hard I must worn you http://www.advancedclutch.com/prod_images/disc_G6_lg.jpg
But if you have 130K on your clutch ,flywheel pressure plate might want to get rid of all that buy new ones http://www.advancedclutch.com/prod_images/pp_HD_lg.jpg

[92vr4]

Y the hell are you awake at 5:20?

[RedBull]

i am awake........... problem? but wait why the hell are you awake?

[RedBull]

none of us have lives. work sucks ass but we embrace it cuz thats more money to spend on our cars.

[92vr4]

+1 for that shiz^^^^^ i gotta be at work at 4:30....damn it

[VIZuki]

see me and REDBULL have an excuse cause if I wasn't at work I'd be home sleeping my ass off LOL..you seem like you like to be on here all day long...hahaha owell only got about 2 1/2 hours left..then I can be lazy for the rest of the day.......

[StreetRX7]

I think you could get away with this one from ACt for your car


http://www.advancedclutch.com/prod_images/disc_G6_lg.jpg


http://www.advancedclutch.com/prod_images/pp_HD_lg.jpg

this 2 setup is perfect...:)

[3tc power]

this is the ones all the street DSM guys use for their setup with the 2600lb pressure plates. why? because the mitsu tranny is butter :rofl::rofl:
http://www.advancedclutch.com/prod_images/disc_SS_lg.jpg

this one is a better step up. for gurly boys lol

http://www.advancedclutch.com/prod_images/disc_G6_lg.jpg

this is for the men who aint scurd lol
R6
http://www.advancedclutch.com/prod_images/disc_r6_lg.jpg

R4
http://www.advancedclutch.com/prod_images/disc_r4_lg.jpg

this is for the GODS of the streets

http://www.10000rpm.com/images/stories/product/9013-55.jpg

[StreetRX7]

Update!!!!!!! Been doing some continuity test 2day on the wire I soder an it was a Success :thumbsup: So its good to go on the IGNITION ....
I put the fender back on the car.... 2 morrow I will do some more testing on Tach,water temp,oil pressure,speedo, an reverse light...That for all the gauges to work like factory with the haltech..... Its would of been easier if he didn't butcher up the harness... :mad: But its ah good challenge for me... << :crazy: :rofl: will have photo's of harness both haltech an stock harness....

More Updates.. I got the water temp,oil pressure,reverse,an speedo to work, :party:Oh an gas gauge.:woot:.. The only one I didn't couldn't get tested was the Tach :sad: :dunno: ,Because I think I'm not getting the rite signal to make it jump or move..:confused:. I might have to wait until I get the motor in an running to get A good signal... :cool:

Wiring: The Harness on top is haltech will connect,Water Temp,3bar Map,TPS,Injectors,Ignition,Air Temp,Direct Pickup,Fuel Pump etc...

The stock harness below will connect speedo,reverse,water temp(stock gauge on dash) the rest or the harness is in the car for oil pressure,fuel gauge etc..

http://www.streetseen.vi/gallery/data/500/medium/wire3.JPG

[StreetRX7]

Well I guess I aint SCURD!!!!... Been running this setup for over 5 yrs.:rofl:.. Even in my other 3rd gen.. harsh like ah mutha:rofl: :rofl:

Brand new..

http://www.streetseen.vi/gallery/data/500/medium/clutch1.JPG

[cruzan7m]

Well i have the 6 puck sprung hub with my RPS 3200lb clutch, an that isht real aggressive on the street, plus my car is a daily driver, it is capable of 600lb ft of torque, so i guess i'm scurd...lol

[VIZuki]

I don't know what you all talking bout them 6 puck sprung grab like a mutha fucka and the unsprung..well lets just say it makes traffic driving a pain in the ass..either or will develop whiplash in your neck LOL no joke :eek2: but sprung 6 puck is both street and strip so thats a better set up none the less for you VR4

[RedBull]

I kinda like my twin disk. it makes a little noise, which bothers me. but it grips like hell can take way mre power than my car will ever make. and I can slip it all I want. its nice for driving around. don't hurt your neck and it grips when u really need it..

[VIZuki]

^^^^i agree just not very practical I to would go with this set up and traffic driving slipping over rev and pop..hmmm they make good twin disks like stated above and your neck can rest easy...lol you can't sue yourself for neck whiplash..

[StreetRX7]

Well i'm used to driven my car with clutch setup an really used slipping it pretty good in traffic.. Plus STX traffic is nothing like NJ,NY,PA Or the TPK...I only drive on the weekends... ;) but for 92vr4 sprung hub will be fine for your 1st time around an being a DD...

Also 6 puck unsprung or twin disk you still here the chatter in the clutch when you drive off from A stop... The main reason I don't like a twin disk ,Like REDBULL said they make noise @ idle dont know if your release bearing good or not.. :) But REDBULL have a top of the line twin disk we put it to the test last drive out...:rofl: :rofl:

[mitsubishi]

Twin Disc = :cool:

[mitsubishi]

Twin Disc = $:cry:

[VIZuki]

^^^ yes expensive but worth it I guess...you spending on the clutch chatter too LOL

[RedBull]

hey like i said it makes a lil noise at idle and when you press in the clutch. but its growing on me. that thing grips. it does chatter a lil if you really try to ride it. but all in all its alot less harsh than a 6 puck. the difference is about 2grand. i checked it out and my clutch is about 2500 bucks:eek: so i doubt there will be another one goin in when this one go's:cry: but i do have to say if you can deal with the noise i really do recommend the twin disk.

[DomesticChiney]

Damn son, my SPEC 3 clutch was 800.

[StreetRX7]

Damn son, my SPEC 3 clutch was 800.

Yeh sir twin disk prices is no joke.. ;)

[92vr4]

But the clutches are :wiggle:



Calm down streetrx/redbull u dont need to prove it to me. It was a joke. So before u start yellin at me i was kidding. Lol

[StreetRX7]

But the clutches are :wiggle:



Calm down streetrx/redbull u dont need to prove it to me. It was a joke. So before u start yellin at me i was kidding. Lol

:rofl: :rofl:

Anyway no updates,WELL Not until midweek.. :) :cool: I will have to hold off on my lil teaser until I get this customer car done.... Well if i'm waiting on parts to come in thats a different story.. ;) :)

[RedBull]

well i have finally got pretty much everything i need for my car. finally got my injectors, wideband, boost controller, all my gauges and pod. once everything gets here im gonna do it all one time. next thing is to save up for a laptop:squint: its been a long expensive road but i think im finally starting to see the light at the end of the tunnel. oh yeah street i'm gonna have some questions about plumbing these fuel rails.

[StreetRX7]

well i have finally got pretty much everything i need for my car. finally got my injectors, wideband, boost controller, all my gauges and pod. once everything gets here im gonna do it all one time. next thing is to save up for a laptop:squint: its been a long expensive road but i think im finally starting to see the light at the end of the tunnel. oh yeah street i'm gonna have some questions about plumbing these fuel rails.


No problem when ever you rdy!!!:cool:
Just take your time an do it rite the 1st time!!..:cool:
I got ah fuel setup I'm going with on this other 3rd gen It crazy nice.. just ah lil expensive.. But gonna save up for this really like it,I have to have it .....I'm sure you would aprove.. an still keep the stock LOOKING setup ;) :) picture below..

This setup is for dual walbro pump 255lbs They also make this setup for dual bosch 044 pumps..
The rite fuel system can really get up there in prices.... that setup with daul walbro start @ $600 no lines an fittings (just pump an assembly)

http://www.streetseen.vi/gallery/data/500/dual_pump.JPG

[RedBull]

yeah BAI!!!!!! thatlooks nice. i have seen a few twin walbro kits but not quite that nice. im thinking a single walbro will do for what i plan on running but you really never can have too much fuel pump.

[92vr4]

Yea bai!!!!!!

[StreetRX7]

I knew you would like REDBULL... :rofl:

yeh 92vr4 I like too!!! :rofl: very nice an a clean setup..

[VIZuki]

Ayy they got good price's on laptops all over island REDBULL more than what you'll need it for. That lil Acer they sell at radio shack with the Pentium Atom processor running XP is pretty sweet nice small and probably again more than you'll need it for. think its 400 bucks...no DVD drive but unless you care about USB adapters it would do the trick for tuning..but you might want one to do other stuff aswell.

[DomesticChiney]

Beautiful, just beautiful. Your doing my fuel system this christmas!!!!!

[StreetRX7]

Beautiful, just beautiful. Your doing my fuel system this christmas!!!!!

:rofl: :rofl: :rofl: Its easy!!!

This is how it looks with out pumps..

http://www.streetseen.vi/gallery/data/500/Dual_Fuel_Assembly_Walbro-2.jpg

[DomesticChiney]

You got pics of your fuel rails?

[StreetRX7]

You got pics of your fuel rails?

No, well the way a rotary work it come's with 2 rail i'm useing the stock primary rail an aftermarket 2ndary rail,I think I might have a picture somewhere around here will search an see...;)

I will have picture when its done!!! no worries.. lol.. fuel rail,line an pump etc..

[cruzan7m]

Damn! that's a nice setup. I have the Walboro 255 in tank an the bosch 044 external,hope that it works...lol

[StreetRX7]

Damn! that's a nice setup. I have the Walboro 255 in tank an the bosch 044 external,hope that it works...lol

you know how I feel about that setup cuz.. but I heard good things about routeing fuel pumps that way....

Anyway no updates yet ... polyurethane mounts still in route :mad: :) all in all everything still lookin really good ... after Motor gets in I will be taking no more picture ... :rofl: sorry but will keep you guyz updated.. lol..

[StreetRX7]

Mounts are in 2day weeeeeeeeeee now gonna pick up clutch up the road ...then she should be rdy to drop in sooonnnn!!!!!....

Also waiting on some rotor housing to finish up this motor 4 this red turbo2 I should get it done by month end... :)

[DomesticChiney]

Awwwwww...... No pics today?

[StreetRX7]

Awwwwww...... No pics today?

I would love to but its coming to a point where I'm cutting back on pic's ;) I have some stuff I really dont want out there yet... sorry!!...Which sorry to say even if I pop my hood very,very few would know what I have as far as my setup... But my biggest thing is turbo sizing I'm the 4th on STX to have this turbo setup but might be the 1st actually to try it out on a car... So i will see how it play out... also some other stuff I'm trying out... ;) :cool:

[DomesticChiney]

This Turbo bigger then my Supercharger?

[StreetRX7]

This Turbo bigger then my Supercharger?

:rofl: :rofl: when the turbo come in I will E-mail you pictures.. ;)

[DomesticChiney]

:rofl: :rofl: when the turbo come in I will E-mail you pictures.. ;)

What da Bloodclaaat? Playing with my emotions here. Just let me know if I should step my Supercharger up one more level.:cool:

[92vr4]

I would say two levels

[DomesticChiney]

I would say two levels

Bumboclaat..... Make me go Chris Brown on my Bank Account trying to keep up with this guy.....:mad:

[StreetRX7]

Bumboclaat..... Make me go Chris Brown on my Bank Account trying to keep up with this guy.....:mad:

lol turbo is capable of making more power than your Supercharger.. Depends on your internals but then you car wont be street.. lol...

:rofl:

I would say two levels

:rofl: :+1:

[DomesticChiney]

Oh...... Well if your no longer gonna stay somewhat streetable...... Hmmmmm........ I'll let you have that then. lol. I still need a car to take home groceries.

[StreetRX7]

Oh...... Well if your no longer gonna stay somewhat streetable...... Hmmmmm........ I'll let you have that then. lol. I still need a car to take home groceries.

Most definitly streetable with A/C dailey driver But it will be right on the edge power wise... Turbo is BIG but not BIG where I would need additive to spool it ;) .... With my fother 3rd gen build I went with alot of brand name like Greddy/HKS etc... but there are alot of other stuff out there which is cheaper an make more power than HKS or Greddy.. lol.. just did my research yrs ago an I said to myself the next car/rx7 I build I will do it my way an not with KITS..... Trust me you will like.. :)

[Tekknikal]

Bumboclaat..... Make me go Chris Brown on my Bank Account trying to keep up with this guy.....:mad:

:rofl: :rofl:

edit - just got back from off island and am catching up on posts still. i missed where you guys added "go chris brown on..." to the dictionary :rofl: sounds good to me though :cool:

[StreetRX7]

Well I got bored 2day an decided to do this... lol... :rofl: I will be replaceing bumper lip I dont like it not aggressive e-nuff...lol..

BEFORE

http://www.streetseen.vi/gallery/data/500/intercooler1.JPG

AND

http://www.streetseen.vi/gallery/data/500/intercooler2.JPG

AFTER

http://www.streetseen.vi/gallery/data/500/intercooler3.JPG

AND

http://www.streetseen.vi/gallery/data/500/intercooler4.JPG

[cruzan7m]

DAmn! the intercooler is also the bumper support.....lol! that isht looks good buddy! Ijust ordered my head studs and clutch disc today. will see about the cams next week.

[92vr4]

That looks like my imtercooler!! That shit looks angry

[StreetRX7]

DAmn! the intercooler is also the bumper support.....lol! that isht looks good buddy! Ijust ordered my head studs and clutch disc today. will see about the cams next week.


The surport is there I just debating if to keep it on or not. :dunno:..(Alrdy cut an fit) But it would be less weight.. lol..

http://www.streetseen.vi/gallery/data/500/intercooler5.JPG

[VIZuki]

like you need less weight in oz.'s........

[StreetRX7]

like you need less weight in oz.'s........

Less weight is alway better ... Then I wont need much power to carry all that weight...

[92vr4]

Thank god cuz rx dont make much power anyways :)

[StreetRX7]

Thank god cuz rx dont make much power anyways :)

Fuuuuuuuuuuuuuuk U BAI!!!!!!!!! :rofl: :rofl:Just make sure my #6 rdy 2morrow.... you gone see the low hp rx7 run 2morow...;) :rofl:

[VIZuki]

Yeh Luis aka papito got me ah great deal on the turbo I need.. ;) :cool:

I'm getting it with race cover.. ;) :)

Yeh some of the fastest import running those turbo's rite now... They are bigger an spool just as fast as ah smaller turbo...

Doesn't he have the fastest street RX7 on island or at the track at least that never comes out of hybernation I hear that car is a beast...lol...sorry D I had too yo:rofl::ugh::ugh::eek::cool:

[VIZuki]

Less weight is alway better ... Then I wont need much power to carry all that weight...

less weight lol in ounces is what the oz was....that won't make a difference I don't think :dunno:......hey clean that oil cooler yo whole you at it....you starving cooling of your oil..or replace with new one....

[StreetRX7]

Doesn't he have the fastest street RX7 on island or at the track at least that never comes out of hybernation I hear that car is a beast...lol...sorry D I had too yo:rofl::ugh::ugh::eek::cool:

who?? papito..?? ;) I'm sure papito can arrange to run that SC scooby when it comes out.... Then you wont have to hear about it being fast...:rofl:

[92vr4]

Hahahahahahahahahah

[StreetRX7]

Will be putting in clutch pretty soon is on it way... But 1st I must finish a turbo2 ... Get it out of the way.. more room for more work...

[DomesticChiney]

Everytime I see you update this thread I go..... Oh good, MORE PICTURES...... only to find yet another tease..........

Stop playing mind games with me!!!! lol

Keep it up though! Lets see some pics as soon as they come!

[StreetRX7]

Everytime I see you update this thread I go..... Oh good, MORE PICTURES...... only to find yet another tease..........

Stop playing mind games with me!!!! lol

Keep it up though! Lets see some pics as soon as they come!

:rofl2:

[VIZuki]

who?? papito..?? ;) I'm sure papito can arrange to run that SC scooby when it comes out.... Then you wont have to hear about it being fast...:rofl:

There you go again always setting up unfair race's street:cool:....whateva Ba Ba BAI!!! why don't you run papito's car........this is the point where you hear crickets churping..hahaha either way I have no problem with that he'll beat me but nice to see where I stand and what tuning will need to be done.:)

[92vr4]

What tuning needs to be done?!


Tuning?

Or major engine work?

[RedBull]

or another car:rofl:

[VIZuki]

great two pieces of guano interact....kill whitey.....LMFAO...major engine work or another car haha how bout you both lick each one of my nuts haha...then go back and laugh about it....hahaha :op:

[StreetRX7]

Still waiting on pressure plate..... :sad: No other updates..

[De O]

:ttiwwp:

[RedBull]

great two pieces of guano interact....kill whitey.....LMFAO...major engine work or another car haha how bout you both lick each one of my nuts haha...then go back and laugh about it....hahaha :op:

dont worry we laugh at you anyway:rofl2:

[StreetRX7]

:ttiwwp:

Dude No updates..:rofl:. Not until clutch comes in... Soon BAI!!!!:)

[De O]

:bs:

[De O]

Dude No updates..:rofl:. Not until clutch comes in... Soon BAI!!!!:)

:yourock:

[cruzan7m]

:lmfao::lmfao:

[StreetRX7]

:lmfao::lmfao:

What so funny ..??? :thefinger: :rofl:

[cruzan7m]

Sorry....couldn't help it:rofl:

[StreetRX7]

Sorry DomesticChiney still no updates...:rofl:. Been dealing with alot of other shit.. lol.. Plus I will have about 3 rx7 in my yard for upgrades by weekend.. Trying to get them out for King Of The Street... I will get 2 outta 3 done for sure.. lol...



Then I 'll jump on this one after this event...

[DomesticChiney]

Sorry DomesticChiney still no updates...:rofl:. Been dealing with alot of other shit.. lol.. Plus I will have about 3 rx7 in my yard for upgrades by weekend.. Trying to get them out for King Of The Street... I will get 2 outta 3 done for sure.. lol...



Then I 'll jump on this one after this event...

Damn.... They don't want pics of their cars taken and posted? Shoot, you can show em to me, aint like I'm gonna be able to race em anytime in the next few months.... ;)

Oh yea. How good are you at exhaust fabrication? I may need my exhaust dumps bent and turned down and out to prevent a massive build up of fumes when I idle for a while. You have the capabilities?

[StreetRX7]

Damn.... They don't want pics of their cars taken and posted? Shoot, you can show em to me, aint like I'm gonna be able to race em anytime in the next few months.... ;)

Oh yea. How good are you at exhaust fabrication? I may need my exhaust dumps bent and turned down and out to prevent a massive build up of fumes when I idle for a while. You have the capabilities?

Well no they don't want the picture of the engine bay,but I can post pictures of the cars lol....

About the exhaust I havent found a good shop who does great exhaust .. I dont have a welding machine ... But when it comes to fabricating the piping its a piece of cake but the welding ..Hmmm thats a different story...:rofl: :rofl: I have done alot of stuff that I was surprise it came out really well...

[DomesticChiney]

Well shoot. I'll bring the Heiniken and a torch...... I'm sure something will come out of it, besides a forest fire....

[De O]

Well shoot. I'll bring the Heiniken and a torch...... I'm sure something will come out of it, besides a forest fire....

:rofl: :h5:

[StreetRX7]

Well shoot. I'll bring the Heiniken and a torch...... I'm sure something will come out of it, besides a forest fire....

:rofl2: well I'll do the Fab an you do the welding.. lol..

STX fire department is slow we might burn down the shop before they get to it.. :rofl2: J/K :rofl:

[StreetRX7]

No updates either on this car.. GOTTA get those other 2 cars done before i even touch this one..lol.. crazy.. but customers come 1st.. lol.. hope to start pretty soon..

[killa-k20EG]

Cuz looking nice

[StreetRX7]

Cuz looking nice

Yeh BAI!!! thanx..!!!...

Wait till you see what I have in store.. lol..<< sooon come...

[StreetRX7]

Ok back @ this again... All the cars are out....

Still Deciding on 2 turbos rite now .... :(...

Will start taken picture soon .. lol..

[StreetRX7]

Well I got bored 2day an decided to do this... lol... :rofl: I will be replaceing bumper lip I dont like it not aggressive e-nuff...lol..

BEFORE

http://www.streetseen.vi/gallery/data/500/intercooler1.JPG





Still in this stage.. lol..

Going with haltech platinum series 1000

An Im going with "BW" turbo dont know what size yet....

[De O]

:party: :h5: :thumbsup:

[92vr4]

Good choice on that turbo

[Want3d]

Nice turbo choice

xD

uhh Hey StreetRX i got a "?" to ask you.

How hard is it to install a 20b-rew or N/A motor into a 3rd gen like yours???

[RedBull]

Nice turbo choice

xD

uhh Hey StreetRX i got a "?" to ask you.

How hard is it to install a 20b-rew or N/A motor into a 3rd gen like yours???

hinson makes a full subframe kit. if you are going with a standalone it shouldnt be too difficult. it all the little things that will drive you crazy.

[92vr4]

Yea like.... Unreliability, no low end torque.

Plus the overheating batteries, and pulleys


:runaway:

[Want3d]

Ooo ok

Thnx i'm tryin to learn everything i can so when the time comes i know what to do.

:cool:

[StreetRX7]

hinson makes a full subframe kit. if you are going with a standalone it shouldnt be too difficult. it all the little things that will drive you crazy.

:+1:...



Yea like.... Unreliability, no low end torque.

Plus the overheating batteries, and pulleys.

Dont forget "ECU" over heating too!!!! :rofl: :rofl: :rofl:

[StreetRX7]

Ok install clutch 2day an short shifter.. lol.. lazy man work.. lol.. Thats all the time I had to work on the car... lol..

[StreetRX7]

Ok had ah lil delay in puttin in motor.. Should be fix 2morrow an installed hopefully....

All the damn bearing fell out of the caseing....lol.. was old tho.. lol.. Ordered the rite tool for the job.. Back in business 2morrow..

Will be posting pictures pretty soon..
Yo M.C... Shes Back in progress.....

[VIZuki]

Yea like.... Unreliability, no low end torque.

Plus the overheating batteries, and pulleys


:runaway:

LOL hey man you know what RX7 stands for=
http://i6.photobucket.com/albums/y220/95EagleAWD/motivator980051e1072c9037da6ce5fba2.jpg

:rofl::rofl::rofl::cry:

[3tc power]

damn! and you guys say i'm the bad one!

[turbomikey]

damn! and you guys say i'm the bad one!

you know dis man looking for he's death wish street and redbull will cut he's ball's and give it to the dog's:rofl:

[Want3d]

damn! and you guys say i'm the bad one!

lol that was sick tho lol

[VIZuki]

hey I didn't create the the pic but obviously some where down the line a trend developed...lol so at least the doggs are walking and stay wealking...but icould say the same about mitsu's also seems those on here other than baby's for other reasons seem to be out of service a bit these days lol...Toyo don't have that problem Nissan too...and ohhh dare I say it Subby's hahaha

[StreetRX7]

you know dis man looking for he's death wish street and redbull will cut he's ball's and give it to the dog's:rofl:

Alrdy did its to late now ... loll....

Its all in fun .. BAI!!!

Anyway got some major work done .. WOOOOHOOOO!!!

BRAND NEW CLUTCH ACT.. unspung..

http://www.streetseen.vi/gallery/data/500/IMAGE0015.JPG

Motor mounts... "POLYURETHANE"...

http://www.streetseen.vi/gallery/data/500/IMAGE0032.JPG

Motor rdy to install..

http://www.streetseen.vi/gallery/data/500/IMAGE0023.JPG

Motor Installed

http://www.streetseen.vi/gallery/data/500/IMAGE0042.JPG

2nd view...

http://www.streetseen.vi/gallery/data/500/IMAGE005.JPG


Ok 2morrow is intercooler an bumper hopefully.....

Ordered some stuff waiting for it to come in .. Soon come!!! :cool:

[StreetRX7]

Before you guyz ask.. this is ah PULL clutch setup.... your have to bolt clutch up after you put motor an tranny 2gether.... <<< which is better to install motor but ah Bitch to tighten clutch bolt to flywheel... lol...

[turbomikey]

looking good bro:)

[De O]

Before you guyz ask.. this is ah PULL clutch setup.... your have to bolt clutch up after you put motor an tranny 2gether.... <<< which is better to install motor but ah Bitch to tighten clutch bolt to flywheel... lol...

Thats f up :dunno:

[De O]

Now hurry up and finish :rofl:

[StreetRX7]

Now hurry up and finish :rofl:

Hahaahaha I tryin too before more customer cars come in... the hard part is done... will be wiring up "Haltech Patinum Series"next week hopefully.. then the followin week ill install turbo it should be here by then.... :)

Got another Big project coming .. soon.. Just spoke to the guy 2day.. another killa project.. cant wait to start.. "INSANE"

[De O]

Finish ur shit first

[cruzan7m]

Before you guyz ask.. this is ah PULL clutch setup.... your have to bolt clutch up after you put motor an tranny 2gether.... <<< which is better to install motor but ah Bitch to tighten clutch bolt to flywheel... lol...

You ain't lying about that cuz! i had to do that with the supra.......pain in the a$$...lol. I see you went with the ACT, cool, i will stick with my RPS:bowdown:

[StreetRX7]

You ain't lying about that cuz! i had to do that with the supra.......pain in the a$$...lol. I see you went with the ACT, cool, i will stick with my RPS:bowdown:

That clutch setup was proven with me for YRS.. but hope it holds up on this setup.. Pushin for more power.... :cool:

That only car I know use ACT an dont hold up well is AWD TALONS... life span of 1 to 1 1/2 yr.. even regular driven.. An they give no warning.. :rofl:

[StreetRX7]

More updates.. Install FMIC....

Yo DeO see I moving rite along.. lol.. For now!!!!!...

http://www.streetseen.vi/gallery/data/500/IMAGE006.JPG

And front bumper

http://www.streetseen.vi/gallery/data/500/IMAGE0016.JPG

with hood close

http://www.streetseen.vi/gallery/data/500/IMAGE0024.JPG

Front view..

http://www.streetseen.vi/gallery/data/500/IMAGE0033.JPG

I started to test fit manifold.. I dont know But I see some modification coming ... lol.. Wel with the wastegate atleast.. Going V-BAND TIAL 44MM..

http://www.streetseen.vi/gallery/data/500/IMAGE0043.JPG...

[turbomikey]

That clutch setup was proven with me for YRS.. but hope it holds up on this setup.. Pushin for more power.... :cool:

That only car I know use ACT an dont hold up well is AWD TALONS... life span of 1 to 1 1/2 yr.. even regular driven.. An they give no warning.. :rofl:

hey... my car
have one to and it's working good;)

[turbomikey]

the car looking good:cool:

[De O]

:party:

[VI_300zxTT]

yea that looks like its a monter

[92vr4]

Please cover those headlights..... It keeps staring at me.... Into my soul...

[Tekknikal]

so this one = street + drag

and the other one = all around street


correct?

[StreetRX7]

so this one = street + drag

and the other one = all around street


correct?

Yes Sir!!!


Please cover those headlights..... It keeps staring at me.... Into my soul...

Its on order... The old ones broke...

yea that looks like its a monter


Thanx BIA!!!